Skip to main content
Reliant Machinery

Powerbond · HPL

Powerbond HPL

High Pressure Lamination

The Powerbond HPL is Reliant's high pressure flatbed laminator for moderate compression lamination. It was developed after the SPL, based on customer input and the needs of new materials and polymers, and is built in working widths up to 3000 mm.

Working width
600–3000mm
Driven tunnel gap
0–150mm
Gap adjustment step
0.1mm

01 / 02

Powerbond HPL laminator with unwind and rewind stations

Powerbond HPL laminator with unwind and rewind stations

Where it fits

Moderate-compression flatbed lamination for more demanding material stacks.

  • Moderate compression, laminating — between the SPL and HPC
  • Working widths from 600 to 3000 mm
  • Same modular Powerbond platform, sized for heavier stacks than the SPL

Specifications

Powerbond HPL specifications.

Published figures. Imperial values are converted from Reliant's metric specifications; engineering confirms the final configuration with your quote.

Powerbond HPL specifications
ProcessHigh pressure lamination (moderate compression)
Working width600–3000 mm (23.6–118.1 in)
Tunnel gap adjustmentDriven, 0–150 mm (0–5.9 in) in 0.1 mm steps
ConstructionModular, extendable heating and cooling sections
ControlPLC / HMI with self-diagnosis

Shared across the Powerbond range

  • Modular construction with extendable heating and cooling sections
  • Single or multiple sets of pressure rollers
  • Driven tunnel gap adjustment from 0 to 150 mm in 0.1 mm steps
  • Independent nip roller gap adjustment
  • Pre-joined or endless, mark-free processing belts
  • Easy and fast belt changing system
  • Accurate processing belt tracking and tensioning
  • Wide range of power options
  • Multiple, individually controlled heating zones
  • PLC / HMI with self-diagnosis and complete process control

Compare

Powerbond HPL against the rest of the Powerbond range.

Powerbond model comparison
SpecificationSPLHPL (this model)HPC
ProcessStandard pressure lamination (light compression)High pressure lamination (moderate compression)High pressure compression
Working width600–2500 mm (23.6–98.4 in)600–3000 mm (23.6–118.1 in)600–3000 mm (23.6–118.1 in)
Tunnel gap adjustmentDriven, 0–150 mm (0–5.9 in) in 0.1 mm stepsDriven, 0–150 mm (0–5.9 in) in 0.1 mm stepsDriven, 0–150 mm (0–5.9 in) in 0.1 mm steps
ConstructionModular, extendable heating and cooling sectionsModular, extendable heating and cooling sectionsModular, extendable heating and cooling sections
ControlPLC / HMI with self-diagnosisPLC / HMI with self-diagnosisPLC / HMI with self-diagnosis

FAQ

Powerbond HPL questions.

What does HPL stand for?

High Pressure Lamination. The HPL is the moderate-compression model in Reliant's Powerbond range of flatbed laminators.

What working widths is the Powerbond HPL built in?

Reliant builds the Powerbond HPL in working widths from 600 mm to 3000 mm (23.6 to 118.1 in).

When should I choose the HPL over the SPL?

When the material stack needs more compression than light lamination. The SPL covers light compression; the HPL covers moderate compression. Reliant engineering will confirm the right model from your materials, width, and throughput.

Request a quote

Discuss the Powerbond HPL with Reliant.

Call the UK or US office, or send the materials, width, and throughput — Reliant will come back with a configuration conversation, not a brochure.

  • Call and you'll reach an engineer, not a switchboard
  • Bring your materials, working width, and throughput
  • We come back with a configuration conversation, not a brochure

Call and you'll reach an engineer, not a switchboard. Direct UK and US lines, answered in business hours.

Request a quoteUKUSA